IES-2307C

7 10/100TX + 3 10/100/1000T/Dual Speed SFP Combo, w/Pro-Ring Managed Industrial Switch

• Supports DIDO (Digital input / output) function
• X-Ring provides Ring recovery time of less than 10ms
• Wide operating temperature range from -40°C to 75°C (-E model)
• UL Class I Division II for Group A,B,C and D

The Lantech IES-2307C is a 7-Port 10/100Base-TX + 3 10/100/1000T with 100/1000 SFP Combo Industrial Switch with SNMP functionality. The SNMP features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP.

The IES-2307C supports Pro-Ring system, which covers X-Ring, Couple Ring, Dual Homing and Dual Ring. X-Ring provides a recovery time of less than 10ms for a ring of up to 250 switches. Couple Ring ensures network recovery protection between two X-Ring groups. Dual homing is to back up the X-Ring groups when connect to upper layer or core switch. It also supports Dual Ring, which can connect two rings without setting couple ports.

The IES-2307C DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the IES-2307C will immediately send an email to pre-defined addresses as well as SNMP Traps out. It provides 2DI and 2DO while disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors into the auto alarm system and transfer the alarm information to IP network with email and SNMP.

Lantech-View is free bundle for 10 node version, in which it monitors and configures multiple Lantech industrial switches. Optional Lantech-View Pro can map up to unlimited user with auto-layout, configuration and discovery.
The IES-2307C is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. With UL Class I Division II approval, the IES-2307C can be implemented in hazardous or explosive condition without accelerating the damage. It’s the best choice for inflammable environment where the liquid, gas and vapor etc might present the hazardous condition which generally to be find in mining, oil & gas, chemical, processing automation areas. It’s also suitable for surveillance, factory automation, transportation, telecom / ISP outside terminal, heavy industrial factory and other factory assembly lines.